Cold Storage Room of Durian with Insulation and Insulation Board

• Cooling Method: Indirect Cooling
• Certification: ISO, CE, CCC
• Condition: New
• Transport Package: Standard Export Packaging
• Specification: 250/200/180/150/120/100/75/50mm
• Origin: China
• Model NO.: BY-KB-series
• HS Code: 7610900000

Product Description

Product Name	Description	Execution standards
Thickness (mm)	250/200/180/150/120/100/75/50	GB50072-2021 Design Specification for Cold Storage JB/T 6527-2006 Insulated sandwich panels for combined cold storage
Width specifications	1120mm
CORE	Polyisocyanurate (PIR)
Raw material brand	Yantai Wanhua	Polyurethane raw materials
Density	Core material density 40 ± 2 kg/m ³	GB/T6343-2009
Thermal conductivity	Thermal conductivity ≤ 0.024W/m · k	GB/T3399-1982(1989)
Oxygen index%	≥30 %	GB/T 2406.2-2009
Dimensional stability	Dimensional stability<3% (70 ºC, 48h)	GB/T 8810-2005
Bonding strength	≥ 1.0kg/cm2 (0.1Mpa); The bonding area of the peeling surface is ≥ 90%	JB/T 6527-2006
Flexural capacity	Simply supported sandwich panel, bearing a uniformly distributed load of 0.5KN/m2, with a relative L/250 at the mid span	JB/T 6527-2006
Compressive strength	Compressive strength ≥ 0.15Mpa	GB/T 13840-2014
Water absorption rate	Water absorption rate ≤ 4%	GB/T8810-2005
Closed cell percentage	≥95 %	GB/T10799-2008
Combustibility	B1 level	GB 8624-2012
Foaming technology	Pentane foaming

The cold storage panels are consisted by an inner metal plate, an outer metal plate, and an intermediate polyurethane insulation layer.
Horizontal and Vertical Operation Methods:
1. Using waterproof film and SBS padding.
2. Galvanized L or U-shaped positioning (fixed with expansion bolts).
3. Sealant substrate.
4. Pre installed board seam sealant (double-sided groove sealant+polyurethane spray in the middle).
5. Vertical wall panel.
6. More than 6 meters require the installation of wall purlins, C-shaped steel, and quick mushroom nails.
Suspended ceiling panel operation method:
1. Determine the length and lifting direction of the ceiling panel based on the main beam of the building structure. (The joint of the ceiling panel is parallel to the main beam of the building)
2. Pre installed suspension beam structural components, 6 # channel steel and fixture suspension beam, suspended M12 lifting screw, connected to C-typeSteel keel.
3. Lift the insulation top plate.
4. Adjust the length of the lifting screw.
5. The main joint is sprayed with polyurethane foam, the PVC sleeve is foamed to break the cold bridge, and the color steel folding piece is trimmed.

FAQ:
1,How strong is your company?
Answer:Our company was established in 2011 and has a professional cold storage design team, installation team, and experienced after-sales maintenance personnel. We can provide a complete set of cold storage design, installation guidance, and after-sales maintenance services.
2,Why did we choose you?
Answer:We can provide you with suitable prices and professional services, so that you can use our products with peace of mind.
3,How long is the delivery time?
Answer:15-35 days after we confirm your request.
4,How do you package the compressor?
Answer:For smaller goods, we use sturdy plywood boxes that comply with export regulations. For larger goods, we strategically place them in freight containers and use safe fastening methods to prevent any potential damage during transportation.
5,What are your payment terms?
Answer:Usually, a 30% down payment is made through T/T after confirming the Proforma Invoice (PI), and the balance will be paid after inspection and before shipment. We accept telegraphic transfer and sight letter of credit.